product information iec 61850-3, ieee 1613 (power substations) compliant up to 4 100mbps copper port and 24 100mbps sfp slots ringon (recovery time < 15ms), rstp for network redundancy port mirror and port trunk with lacp -40 to +85 ?c operating temperature range (w models) features product information henrich electronics corporation main offce tel: 860-487-9869 fax: 860-487-9478 www.henrich-inc.com MX6024 series he0001du1033ds - 1/3 ?2013 henrich corporation. all rights reserved MX6024 series iec61850-3 and ieee1613 24-port rackmount managed ethernet switches
the MX6024 series is designed for power substation automation applications that operate in extremely harsh environments. the MX6024 series is compliant with iec 61850-3, and its emc immunity exceeds ieee 1613 class 2 standards to ensure zero packet loss while trans - mitting at wire speed. with gigabit ethernet, redundant ring, and 220vadc/110vac isolated redundant power supplies, the MX6024 series further increases the reliability of your communications and saves cabling/wiring costs. the wide range of MX6024 models available support multiple types of port confguration, with up to 4 copper ports and 20 sfp slots. taken together, these features allow greater fexibility, making the MX6024 suitable for a variety of industrial application. introduction tel: 860-487-9869 www.henrich-inc.com MX6024 series he0001du1033ds - 2/3 ?2013 henrich corporation. all rights reserved specifcations technology standard : ieee802.3, 802.3u, 802.3x, 802.1q, 802.1p processing type : store and forward broadcast storm : automatic broadcast storm control management : by web browser ringon : recovery time within 15ms flow control : full duplex flow control, half duplex back pressure control protocols : igmp snooping, gmrp, snmpv1/v2c/ v3, dhcp client, http, https, telnet, ntp client switch properties mac table size : 8k priority queues : 4 max. number vlans : 64 vlan id range : vid 1 to 4094 igmp groups : 256 interface rj45 port : 10/100baset(x) or 10/100/1000baset(x) auto negotiation speed fiber ports : lc connector fiber module : 100base-fx spf module (accessories are optional) led indicators : power, port status, 10/100m console port : db9 male output warning : relay, standard 2 pin power requirements input voltage : 120~370vdc @ 30w max 85~265vac @ 30va max input connection : barrier type terminal blocks physical characteristics case : slim metal case, ip30 design dimensions : 44344350mm installation : rack mounting optical fiber mode multi-mode single mode transmission distance 2km 20km centre wavelength 1310nm 1310nm cable size 62.5/125um 9/125um tx power(dbm) -20~-10dbm -15~-8dbm rx power(dbm) < -32dbm < -32dbm transmission rate 100mbps 100mbps environment limits operating temp. : wide temp. models: -40 to 85?c storage temp. : -40 to 85?c ambient relative humidity : 5 to 95%(non-condensing) standards and certifcations emi : fcc part15, cispr(en55022) class a ems : en61000-4-2(esd) level 4, en61000-4-3(rs) level 4, en61000-4-4(eft) level 4, en61000-4-5(surge) level 4, en61000-4-6(cs) level 4, en61000-6-2 shock : iec 60068-2-27 freefall : iec 60068-2-32 vibration : iec 60068-2-6 warranty warranty period : 3 years
ordering information MX6024 series MX6024-20sfp-vhw rackmount managed, 4 x 100mbps copper port, 20 x 100mbps sfp slots, industrial wide temperature -40c to +85c, power input 120~370vdc or 85~264vac tel: 860-487-9869 www.henrich-inc.com MX6024 series he0001du1033ds - 3/3 ?2013 henrich corporation. all rights reserved note: all of the above products sc connector can be replaced by st connector
|
